Do You Need To Let Pool Filters Dry After Cleaning
I like to let them dry one time in a while. You lot can blow them off or simply tap them and get a bit of powdery stuff off - but I certain don't think information technology's a trouble to put them back in moisture.
The Unicel Filter people put a lot of practiced info about the care and feeding of these products up on their spider web site. Here is an excerpt:
"QUESTION:
What is the process to clean my cartridge?
Respond:
i. Remove the cartridge from the filter housing post-obit the manufacture�s instructions.
2. Use a garden hose with a straight menses nozzle to launder down the filter element. Piece of work from the top down, belongings the nozzle at a 45 degree bending, and wash all the pleats with emphasis betwixt pleats.
three. Rinse until all clay and droppings is gone.
4. For all spa cartridges and elements used in swimming pools where perspiration, suntan lotions, and other oils are present, soak the element for at least one hour (over nighttime is more effective) in:
- a commercial filter cleaner; or
- 1 cup trisodium phosphate (TSP) to five gallons water; or
- one cup dishwasher detergent to five gallons of water.
five. Rinse the cartridge once more to remove oils and cleaning solution.
half dozen. If the filter has a coating of algae, calcium carbonate (residual from calcium hypochlorite), iron, or other minerals, soak the cartridge in a solution of i office muriatic acrid to 20 parts water until all bubbling stops. Warning: Failure to remove all oils and cleaning solution before acid soaking volition result in a permanent restriction of water flow and cause premature cartridge failure.
vii. Rinse the cartridge clean an reassemble housing.
Warning: Clothing rubber gloves and prophylactic glasses when using acid and chorine. Do not add water to acid. Do not mix chlorine and acid.
NOTE: Unicel does non recommend the utilise of diatomaceous globe (DE) with cartridge filter. DE particles will become trapped in the body of the media and shorten cartridge life. If desired, a cellulose fiber (synthetic DE) tin can be used in moderation.
Source: https://www.whatsthebest-hottub.com/forum/index.php?topic=9368.0
Posted by: radleythemblent.blogspot.com
0 Response to "Do You Need To Let Pool Filters Dry After Cleaning"
Post a Comment